Craftsman C944.514360 Instruction Manual

Instruction Manual25cc / 1.5 cu.in. 2-Cycle16 Inch Cutting Path / 0.080 In. LineGASOLINE WEEDWACKER ®Model No.0944.514360• Safety• Assembly• Operation

LINE REPLACEMENT1. Remove spoot by firmly pulling ontap button.2. Clean entire surface of hub andspool3. Replace with a pre-wound spool, orcut two len

4BI,WARNING: Perform the follow-ing steps after each use:• Allow engine to cool, and secure theunit before storing or transpoding.• Store unit and fue

TROUBLESHOOTING TABLE,J_.WARNING: Always stop unit and disconnect spark plug before perform-ing all of the recommended remedies below except remedies

YOUR WARRANTY RIGHTS ANDOBLIGATIONS: The U. S. Environ-mental Protection Agency/Environ-ment Canada and Sears Canada,Inc., are pleased to explain the

centres.Call1-800-469-4663.MAIN-TENANCE, REPLACEMENT AND RE-PAIR OF EMISSION RELATEDPARTS: Any Sears Canada approvedreplacement part used in the perfo

Warranty Statement 2 Storage 11Safety Rules 2 Troubleshooting Chart 12Assembly 4Emissions Statement 13Operation 5Maintenance 9 Parts List Center Secti

Ifsituationsoccurwhicharenotcov-eredinthismanual,usecareandgoodjudgment.Ifyouneedassis-tance,contactyourSearsServiceCentre.OPERATOR SAFETY• Dress prop

• Store unit and fuel in area wherefuel vapors cannot reach sparks oropen flames from water heaters,electric motors or switches, fur-naces, etc.• Stor

KNOW YOUR TRIMMERREAD THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOURUNIT Compare the illustrations with your unit to familiarize yours

IMPORTANTExperienceindicatesthatalcoholblendedfuels(calledgasoholorusingethanolormethanol)canattractmois-turewhichleadstoseparationandformationofacids

STARTING A WARM ENGINE1. Move the choke lever to the HALFCHOKE position.2. Squeeze and hold the throttle trig-ger. Keep throttle trigger fullysqueezed

•Thetipofthelinedoesthecutting.Youwillachievethebestperform-anceandminimumlinewearbynotcrowdingthelineintothecuttingarea.Therightandwrongwaysareshownb

MAINTENANCE SCHEDULE,_WARNING: Disconnect the spark plug before performing maintenanceexcept for carburetor adjustments,CARE & MAINTENANCE TASKChe