Craftsman 14315 Owner's Manual download pdf (Page 10)

10 ― English

BECOME FAMILIAR WITH THE CHARGER

See Figure 13, page iv

Before attempting to use this charger,

become familiar with all of its operating

features and safety requirements.

CHARGING THE BATTERY PACKS

See Figure 14, page iv

BATTERY PACKS AND CHARGER

■ Do not use other battery chargers. The

battery charger supplied is specically

designed for the Lithium-Ion Battery used in

this garden appliance.

■ Check the main power supply! The voltage

of the power supply must correspond with the

data on the nameplate of the battery charger.

Battery chargers operate on 100-240V.

WARNING!

■ If any part of the charger is missing or

damaged, do not operate it! Replace the

charger with a new one. Failure to heed this

warning could result in possible serious injury.

■ Check the voltage! The voltage must

comply with the information on the rating

label.

BATTERY CHARGING PROCEDURE

■ Align one of the battery packs to the slots

on the charger and slide it in until it locks in

place.

■ Connect the charger to the power supply.

■ Allow sufcient charging time (see Product

Specications), and then disconnect the

charger from the power supply.

■ Press the release button on the battery

pack and remove it from the charger.

NOTE:

It is normal for the battery pack and

charger to become warm (but not hot) during

charging process. If the battery does not

charge properly, check to make sure the

electrical outlet is "live".

Always charge the battery before storage!

NOTE:

The battery is supplied partially

charged. To ensure full capacity of the

battery, charge the battery in the charger

before using the product for the rst time.

The Lithium-Ion battery can be charged at

any time without reducing its service life.

Interrupting the charging procedure does not

affect the battery.

WARNING!

To reduce the risk of re,

never leave either battery connected to the

charger for more than 24 hours!

CHARGER INDICATORS

■ Preparation: The charging process starts

as soon as the battery charger is plugged

into a power supply socket and the battery is

inserted into the charger.

■ If a battery is not inserted, a continuous

green light indicates that the charger is

plugged into a power supply socket and is

now ready to begin charging.

■ Charging: a continuous red light on the

charger indicates that the battery is charging

normally.

■ Charged: continuous green LED on the

charger indicates that the battery is ready for

use.

■ The indicator lights on the charger show

the charger status:

SYMBOL

INDICATOR

LIGHTS

STATUS

red,

continuous

charging

green,

continuous

fully charged

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments