Craftsman 917.270752 User Manual Page 141

  • Download
  • Add to my manuals
  • Print
  • Page
    / 240
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 140
SERVICE AND ADJUSTMENTS
^CAUTION: Before performing any service or adjustments:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
Place attachment clutch in “DISENGAGED" position.
Turn ignition key “OFP and remove key.
Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come
in contact with plug.
TRACTOR
TO REMOVE MOWER
Mower will be easier to remove from the
right side of tractor.
Place attachment clutch in "DISEN
GAGED” position.
Move attachment lift lever forward to
lower mower to its lowest position.
Roll belt off engine pulley.
Remove small retainer spring, and lift
clutch spring off pulley boit.
Remove large retainer spring, slide
collar off and push housing guide out of
bracket.
Disconnect anti-swaybar from chassis
bracket by removing retainer spring,
Disconnect suspension arms from rear
deck brackets by removing retainer
springs.
Disconnect front links from deck by
removing retainer springs.
Small Retainer Spring
Raise lift lever to raise suspension arms.
Slide mower out from under tractor.
IMPORTANT: If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links and hook the
clutch spring onto square hole in frame.
TO INSTALL MOWER
Raise attachment lift lever to its highest
position.
Slide mower under tractor with dis
charge guard to right side of tractor.
Lower lift lever to its lowest position.
Install mower in reverse order of
removal instructions.
Hi'.:
Clutch Spring
Retainer Spring
Anti-Sway Bar
Collar
Square Hole
Engine Pulley
Front Link
Retainer Springs
(Both Sides)
Housing Guide -j- Bracket
Large Retainer Spring
21
Page view 140
1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 239 240

Comments to this Manuals

No comments