Craftsman 119.214000 User Manual download pdf (Page 5)

d. Place the blade tension knob on to the blade tensioner {See

Fig. 4).

b. Fasten the guide rail with two each star knob screw and washer

to the table. Use the hex socket head cap screw, washer and wing

nut for correcting the working table flatness. (See Fig. 2)

c, Lay the rip fence onto the guide rail. Adjust the rip fence parallel

to the saw blade. Tighten rip fence handle by pressing downward.

(See Fig. 3)

FIG. 4

e. To ensure sufficient upright stability of the machine it should be

bolted to floor, bench or worktable. For this purpose 6mm holes

are provided in the machine’s base. (See Fig. 5)

f. The bandsaw has a 2-1/2" dust port included. (See Fig. 5)

It is recommended that when in use, the bandsaw is connected to

a suitable dust collector.

GETTING TO KNOW YOUR BANDSAW

Lock switch

Guide rail

Blade tension knob

oor iocking knob

Blade guide

/Miter gauge

Upper table turnnion-'

Lower table turnnion"

Dust poi

Blade tracking knob

■Guide post adjusting knob

-enee

otor

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Craftsman 119.214000 User Manual Page 5