Craftsman 917.20383 Operator's Manual download pdf (Page 32)

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEM

Loss of drive

CAUSE CORRECTION

Freewheel control in 1

"DISENGAGED" position.

Debris on steering plate (if 2

equipped).

Motion drive belt worn, damaged, 3

or broken.

] Air trapped in transmission during

shipment or servicing.

I Axle key missing.

Place freewheel control in

"ENGAGED" position.

See "CLEANING" in the

maintenance section.

Replace motion drive belt.

4 Purge transmission.

5 Install axle key at rear wheel. See

"TO REMOVE WHEEL" in the

Service and Adjustments section.

Engine "backfires" 1 Engine throttle control not sel 1 Move throttlecontrol between

when turning between half and full speed (fast) half and full speed (fast) position

engine "OFF" position before stopping engine, before stopping engine.

Engine dies when 1 Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"

tractor is shifted is not "ON" while mower or other position. See Operation section.

into reverse attachment is engaged.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

No comments

Craftsman 917.20383 Operator's Manual Page 32