Craftsman 24322 Owner's Manual download pdf (Page 5)

FIGURE 5

FIGURE 6

FIGURE 7

• Attach the (RH) and (LH) hitch tubes to the frame tube

using four 1/4" x 2" hexbolts (C) and 1/4" nylock nuts

(D). Tighten. See gure 6.

• Assemble the Control Cable to the Hitch Control Tube

using the carriage bolt and nylon wing nut. Tighten.

See gure 7.

• Assemble the (RH) and (LH) hitch tubes to the control

tube using two 1/4" x 1-3/4" hex bolts (B) and 1/4"

nylock nuts (D). Tighten. See gure 5.

• Assemble the plastic caps onto the ends of the hitch

tubes and control tube as shown in gure 5.

FIGURE 8

• Assemble the Hitch Brackets to the Hitch Control Tube

using two 1/4" x 1-3/4" hex bolts (B) and 1/4" nuts (D).

Tighten. See gure 8.

• Assemble the hitch pin (H) through the hitch brackets

and secure with the 1/8" hair cotter pin (E). See gure

1 2 3 4 5 6 7 8

No comments

Craftsman 24322 Owner's Manual Page 5