C,
O.
Set up the tool by selecting the
proper biscuit size and setting the
adjustable fence angle at 0 °.
Using the bottom registration
surface, align the tool with the
biscuit location marks and make a
vertical and a horizontal plunge cut
for each biscuit location as shown
in Figure 30.
E. Glue, assemble and clamp the joint.
FIG 30
IMPORTANT
To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment should be performed by Sears
service centers.
ACCESSORIES
Recommended accessories for use with
your tool are available at extra cost from
Sears stores or Sears service centers.
12
Comments to this Manuals