Craftsman 315.275061 Owner's Manual download pdf (Page 7)

ADJUSTMENTS

INSTALLING/REMOVING cUTrERS

See Figures 3, 4. and 5.

1. UNPLUG YOUR ROUTER.

Place the posileck spindle lock into lock posttion. See

Figure 3. NOTE: If spindle does not lock, turn caller nut

with wrench, applying pressure at the same time to the

spindle lock with your thumb or finger. When lock

mechanism engages with notch in spindle, spindle lock

will slide into lock position.

3. Place router upside down on workbench or lay it face

down on its side in order to gain easy access to collet

nut.

4. Place 7/8= end of the combination wrench provided

through back of router base onto collet nut and turn

counterclockwise to loosen. See Figure 4.

5. If installing cutter for the first time, it can be installed

once ooUet nut is loose. If changing cutters, cutter will

easily slip from oollet after loosening collet nut.

6. The collet is machined to precision tolerances to fit

cutters with 1/2" diameter shanks. If using a cutter with

a 1/4" diameter shank, place the 1/4" adapter provided

in the oollet. See Figure 5.

7. Insert shank of cutter into collet until shank bottoms out,

then pull it out 1/16" to allow for expansion when the bit

gets hot.

8. -righten the collet nut securely by turning clockwise with

the wrench provided. See Figure 4.

9. Place posileck spindle lock back in unlock position.

Otherwise, intedocking mechanism of spindle lock will

not let you turn your router on. If you forget, the

spindle lock Indicator light will alert you that spindle

Is stlU locked when you connect router to power

supply,

Page 7

SPINDLE LOCK

INDICATOR LIGHT POSILOCK

SPINDLE LOCK

TO LOCK

CuI-rER

COMBINATION

WRENCH

COLLET

NUT

TO TIGHTEN

COLLET NUT,

1/2" COLLET NUT

TO LOOSEN

COLLETNUT

Fig. 4

CU'I-rER WITH 1/4"

SHANK DIAMETER

1/4" ADAPTER

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Craftsman 315.275061 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.275061