Craftsman 315.214490 User Manual

Owner's Manual9 in. single speed BAND SAWModel No. 315.214490Save this manual for future reference.^ CAUTION: Read and follow all Safety Rules an

The following labels are on the band saw with locations indicated.BLADE TENSION ADJUSTMENTTO RELEASE ElflDE TENSION, TO ADJOST BLADE TENSION,Rol.ile I

FEATURESKNOW YOUR BAND SAWBefore attempting to use, familiarize yourself with alt operating features and safety requirements of your Sears Craftsman b

ASSEMBLYINSTALLING SCALE INDICATORSee Figure 7. Attach the scale indicator to the saw frame below the scale using the screw (M5 x 8) supplied.ANGLE A

ASSEMBLYCLAMPING BAND SAW TO WORKBENCHSee Figure 10. ,If the band saw is to be used in a portable application, we recommend that you fasten it perman

ADJUSTMENTSINSTALLING AND ADJUSTING THE BLADESee Figures 13 and 14.A WARNING: To prevent accidental starting that could cause possible serious persona

ADJUSTMENTSADJUSTING BLADE TENSIONSee Figures 15, 16, and 17. Turn off saw, remove switch key and unplug saw.WARNING: Failure to remove switch key a

ADJUSTMENTS Check the position of the blade on the lower tire. The blade should be completely on the tire. If not, adjust the tracking until the bla

ADJUSTMENTSBUDE GUIDE ASSEMBLYFig. 20 Move the thrust bearing to within 1/64 in. of the blade. Tighten the thrust bearing screw securely. Repeat thi

BASIC OPERATIONBASIC OPERATION OF THE BAND SAWA band saw is basically a “curve cutting” machine. It can also be used for straight-line cutting operati

BASIC OPERATIONPlan the way you will hold the workpiece from start to finish:Do not hand hold pieces so small that your fingers will go under the blad

TABLE OF CONTENTSTable of Contents...;...

MAINTENANCEA WARNING: When servicing, use only identical ** Craftsman replacement parts. Use of any other part may create a hazard or cause product da

MAINTENANCECarefully pull the brush straight off of the brush holder to replace the brush. Push the new brush on the holder until you hear it snap In

TROUBLESHOOTINGA WARNING: For your own safety, turn switch Off, remove switch key and unplug the saw from power supply before adjusting or aligning yo

23

CRAFTSMAN BAND SAW - MODEL NO. 315.214490The model number will be found on a plate attached to the frame. Always mention the modelnumber in all corres

CRAFTSMAN BAND SAW - MODEL NO. 315.214490The model number will be found on a plate attached to the frame. Always meritlon the model number in all corr

CRAFTSMAN BAND SAW - MODEL NO. 315.214490Tbe model number will be found on a plate attached to the frame. Always mention the modelnumber in all corres

CRAFTSMAN BAND SAW - MODEL NO. 315.214490The model number wilt be found on a plate attached to the frame. Always mention the modelnumber in all corres

CRAFTSMAN BAND SAW - MODEL NO. 315.214490ro00

to(Or-------------------------- CRAFTSMAN BAND SAW - MODIEL NO. 315.2 !1^M90 ————>PARTS LIST FOR FIGURE CKeyPartKey PartNo. NumberDescriptionQuan.N

RULES FOR SAFE OPERATIONThe purpose of safety symbols is to attract your attention to possibie dangers. The safety symbois, and the expianations with

CRAFTSMAN BAND SAW - MODEL NO. 315.214490COoFIGURE D

CRAFTSMAN BAND SAW - MODEL NO. 315.214490The model number will be found on a plate attached to the frame. Always mention the model number in all corre

For the repair or replacement parts you need delivered directly to your homeCall 7 am - 7 pm, 7 days a week1-800-366-PART(1-800-366-7278)For repair se

RULES FOR SAFE OPERATION (Continued)When usfng an extension cord, be sure to use one heavy enough to carry the current your product will draw. An unde

BEFORE MAKING A CUT, BE SURE ALL ADJUSTMENTS ARE SECURE.RULES FOR SAFE OPEIIATION (Continued)BEFORE CHANGING THE SETUP, REMOVING COVERS, GUARDS, OR

ELECTRICALEXTENSION CORDSUse only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug. Wh

GLOSSARY OF TERMS FOR WOODWORKINGBevel CutA cutting operation made with an angled table. CrosscutA cutting operation made across the grain or the widt

UNPACKINGWARNING; To prevent accidental starting that could cause possible serious personal injury, assemble ail parts to your saw before connecting i

A.irCRBFTSMBN9-in. Band Saw2-whee!1/3-HP(max. developed}A WARNING / ADVERTENCIA► For your safely, read owner’s manual before operating saw. Wear ey