Craftsman 137.224320 User Manual

Owner’s ManualBefore using this band saw, read this manual and follow all its Safety Rules and Operating Instructions.* Installation* Operation* Ma

ASSEMBLY AND ADJUSTMENTSASSEMBLY INSTRUCTIONSTOOLS NEEDED«ED^ i ‘ r* I ‘ I ' i ' Il-A I iJPhillips screwdriverCombination squareT“* I I &a

ASSEMBLE THE BAND SAW TABLE (FIG. D, E, F, G)Mounting the trunnion support bracket (FIG. D)1.2.3.4.Remove the two hex head bolts (1) and washers (2),

INSTALLING AND REMOVING BLADES (FIG. H)A WARNINGTo avoid injury from accidental starting, always turn theswitch OFF and remove the plug from the power

INSTALL POWER CORD BRACKETS (FIG. J)1. Power cord brackets (1) are provided for convenient cord storage. Attach the power cord brackets to the back o

BLADE TENSiON (FIG. M)A WARNINGTo avoid injury, turn the switch OFF and disconnect the saw from the power source before making any adjustments, NEVER

UPPER BLADE GUIDES AMD BLADE SUPPORT BEARING (FIG. P, Q)® The blade guard has been removed for clarity of illustration. To avoid injury never operate

Support bearing (FIG. S)6. Loosen the bearing hex socket screw (7) with the hex wrench.7. Move the blade support bearing shaft (8) in or out until t

To avoid twisting the blade, do not turn sharp corners, saw around corners.A band saw Is basically a "curve-cutting" saw. It is not capable

CHANGING SPEED SETTING (FIG.Y)A WARNINGTo avoid injury, turn the switch OFF and disconnect the sawfrom the power source before making any adjustments.

12. Replace the blade wheel. Push the wheel on firmly until it is touching the saw pulley. Replace and tighten the flange and nut.13. Reinstall the

TABLE OF CONTENTSECTION pageWarranty...

TROUBLESHOOTINGTROUBLESHOOTING GUIDEA WARNINGTo avoid injury from an accidental start, turn the switch OFF and always remove the plug from the power s

MOTORProblemProbable CauseRemedyNoisy operation.1. Incorrect belt tension.2. Loose motor pulley.3. Loose pulley cover.1. Adjust tension. See ASSEMBL

гогоKey Part No. Description S52SQfyKey Part No. Description Size Qty13BS00101 BASE 1 41 3AE09601 SAFETY SWTTCH 12 3BS00201 UPPER ARM 1 42 3AE04601 BA

мKey Part No.DescriptionSize Qty KeyPart No.DescriptionSizeQty00'ЗАЕ13101 DUST COLLECTION HOSE11103BS11001CROSSЩШ SCREW W/IWASH5! 3/16*3/84S13BS0

STANDPARTS LIST FOR FIGURE C137.224320Key Part No. Description Qty1 3BS40101 Stand top plate 12 3BS402Q1 Lower bracket (long) 23 3BS40301 Lower bracke

STANDFIGURE C137.22432010i27i

GENERAL SAFETY INSTRUCTIONSBEFORE USING THE BAND SAWSafety Is a combination of common sense, staying alert and knowing how to use your band saw,A WARN

24. DO NOT operate the tool if you are under the influence of any drugs, alcohol or medication that could affect your ability to use the tool properl

ELECTRICAL REQUIREMENTSPOWER SUPPLY AND MOTOR SPECIFICATIONSA WARNINGTo avoid electrical hazards, fire hazards, or damage to the tool, use proper circ

Be sure your extension cord is properly wired and ingood condition. Always replace a damaged extension cord or have it repaired by a qual

UNPACKING YOUR BAND SAWCC^tOO’erDMPoI]-V ^ J

KNOW YOUR BAND

GLOSSARY OF TERMSCRAFTSMAN BAND SAW TERMSBLADE GUIDES ~ Support the blade and keep it from twisting during operation. Blade guides must be adjusted wh