Craftsman 12007 Owner's Manual download pdf (Page 7)

Operation

Vacuuming Dry Materials

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. For dry vacuuming, the cartridge ﬁ lter

must be installed correctly. To verify,

please refer to Installing Cartridge Filter

on page 10.

3. Place the power head back on the

collection tank, and secure it in place

using the latches. (Fig. 2)

4. Insert the locking end of the hose into

the vacuum port and lock in place.

(Fig. 3).

5. Choose the desired accessory and

insert onto the end of the hose. (Fig. 4)

6. Plug the power cord into the outlet.

(Fig. 5)

7. Turn the motor on by pressing the

power switch to the ‘I’ (ON) position

and begin vacuuming. (Fig. 6)

8. Once you have completed vacuuming,

press the power switch to the ‘O’ (OFF)

position and unplug the power cord

from the outlet.

O = OFF I = ON

DO NOT USE THE CARTRIDGE FILTER

FOR LIQUID VACUUMING.

CAUTION: Do not vacuum drywall dust,

ﬁ replace soot or ash with standard

Wet/Dry ﬁ lter. This is very ﬁ ne dust

which will not be captured by the ﬁ lter

and may cause damage to motor. To

purchase the ﬁ ne dust ﬁ lter, call

1-800-469-4663 or visit a Sears store.

WARNING: Be sure to read, understand and apply all the information in the

Important Safety Instructions section at the beginning of this operator's manual.

Do not vacuum in areas with ﬂ ammable gases, vapors, or explosive dusts in the

air. Flammable gases or vapors include but are not limited to: lighter ﬂ uid,

solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays.

Explosive dusts include but are not limited to: coal, magnesium, grain or gun

powder. To reduce the risk of health hazards from vapors or dust, do not

vacuum toxic materials.

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments

Craftsman 12007 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Vacuum cleaners Craftsman 12007