Craftsman JT2503RC Owner's Manual download pdf (Page 5)

4 5

4 5

POWER TOOL SAFETY

GENERAL SAFETY INSTRUCTIONS

BEFORE USING THIS POWER TOOL

Safety is a combination of common

sense, staying alert and knowing how

to use your power tool.

● To avoid mistakes that could

cause serious injury, do not plug

the tool in until you have read and

understood the following.

● Read all instructions before

operating product. Failure to

follow all instructions listed below

may result in electric shock, fire

and/or serious injury.

1. READ and become familiar

with the entire Operator’s

Manual. LEARN the tool’s

application, limitations and possible

hazards.

2. KEEP GUARDS IN PLACE and in

working order.

3. REMOVE ADJUSTING KEYS

AND WRENCHES. Form the habit

of checking to see that keys and

adjusting wrenches are removed

from the tool before turning ON.

4. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

5.

DO NOT USE IN DANGEROUS

ENVIRONMENTS. Do not use

power tools in damp locations, or

expose them to rain or snow. Keep

work area well lit.

6. KEEP CHILDREN AWAY. All visitors

and bystanders should be kept a

safe distance from work area.

7.

MAKE WORKSHOP CHILD PROOF

with padlocks, master switches or by

removing starter keys.

8.

DO NOT FORCE THE TOOL. It will

do the job better and safer at the

rate for which it was designed.

9.

USE THE RIGHT TOOL. Do not

force the tool or an attachment to do

a job for which it was not designed.

10.

USE PROPER EXTENSION

CORDS. Make sure your extension

cord is in good condition. When

using an extension cord, be sure

to use one heavy enough to carry

the current your product will draw.

An undersized cord will result in

a drop in line voltage and in loss

of power which will cause the tool

to overheat. The table on page

12 shows the correct size to use

depending on cord length and

nameplate ampere rating. If in

doubt, use the next heavier gauge.

The smaller the gauge number, the

heavier the cord.

WARNING

!

1 2 3 4 5 6 7 8 9 10 ... 55 56

Comments to this Manuals

No comments