Craftsman 152.220600 Owner's Manual download pdf (Page 13)

Turnthepowerswitch"OFF"andunplugthepower

cordfromitspowersourcepriortoanymaintenance.

LUBRICATION

The Bench Grinder has sealed lubricated bearings in

the motor housing that do not require any additional

lubrication from the operator.

CLEANING

With the Bench Grinder unplugged, rotate the abrasive

wheels slowly and inspect for any damage or trapped

shavings.

CAUTION: REPLACE the abrasive wheels if there is

any damage at all. FAILURE to replace a damaged

wheel can cause serious injury to the operator.

CAUTION: DO NOT USE FLAMMABLE MATERIALS

to clean the Bench Grinder. A clean dry rag or brush is

all that is needed to remove dust and debris buildup.

Repairs to the Bench Grinder should be performed by

trained personnel only. Contact your nearest Sears

Service Center for authorized service. Unauthorized

repairs or replacement with non-factory parts could

cause serious injury to the operator and damage to the

Bench Grinder.

TO PREVENT INJURY TO YOURSELF or damage to the Bench Grinder, turn the switch to the "OFF" position and

unplug the power cord from the electrical receptacle before making any adjustments.

PROBLEM

Motor does

not run

Motor does not

have full power

Motor runs hot

Motor stalls or

runs slow

Fuse blows or

circuit breaker

trips

LIKELY CAUSE(S) SOLUTION

1. Machine not plugged in

2. Power switch in "OFF" position

3. Power cord is faulty

4. Fuse or circuit breaker are open

5. Damaged motor

1. Incorrect line voltage

2. Damaged motor

1. Motor is overloaded

2. Poor air circulation around motor

1. Motor is overloaded

2. Incorrect line voltage

3. Capacitor has failed

1. Motor overloaded

2. Overloaded electrical circuit

3. Wrong fuse or circuit breaker

4. Undersized or excessive length of

extension cord, see manual

5. Grinding wheels are blocked

1. Plug power cord into electrical receptacle

2. Lift switch to "ON" position

3. Return to Sears Service Center

4. Overloaded electrical circuit

5. Return to Sears Service Center

1. Have a qualified electrician check line for proper voltage

2. Return to Sears Service Center

1. Reduce pressure on workpiece

2. Remove any blockage around motor

1. Reduce pressure on workpiece

2. Have a qualified electrician check line for proper voltage

3. Return to Sears Service Center

1. Reduce pressure on workpiece

2. Reduce the amount of items on circuit

3. Replace with correct fuse or circuit breaker

4. Use correct size

5. Unplug machine and remove obstruction

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Craftsman 152.220600 Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Straight grinders Craftsman 152.220600