Craftsman 973.114240 User Manual download pdf (Page 10)

OPERATION

SWITCH LOCK

See Figure 2.

The switch trigger can be locked in the OFF position.

This feature can be used to prevent the possibility of

accidental starting when not in use. To lock switch

trigger, place the direction of rotation selector in

center position.

A WARNING: Battery tools are always in operating

condition. Therefore, switch should always be locked

when not in use or carrying at your side.

REVERSIBLE

See Figure 3.

This tool has the feature of being reversible. The

direction of rotation is controlled by a selector located

above the switch trigger. With the drill held in normal

operating position, the direction of rotation selector

should be positioned to the left of the switch for drilling.

The drilling direction is reversed when the selector is to

the right of the switch. When the selector is in center

position, the switch trigger is locked.

SELECTOR

CAUTION: To prevent gear damage, always allow

chuck to come to a complete stop before changing the

direction of rotation.

To stop, release switch trigger and allow the chuck to

come to a complete stop.

TO INSTALL BATTERY PACK

See Figure 4.

■ Lock switch trigger on your drill by placing the

direction of rotation selector in center position.

See Figure 2.

■ Place battery pack in your drill. Align raised rib

inside drill with groove on battery pack.

See Figure 4.

LATCHES

DEPRESS LATCHES TO

RELEASE BATTERY PACK

Fig. 4

■ Make sure the latches on each side of your battery

pack snap in place and battery pack is secured in

drill before beginning operation.

CAUTION: When placing battery pack in your drill,

be sure raised rib inside drill aligns with groove on

battery pack and latches snap into place properly.

Improper assembly of battery pack can cause

damage to internal components.

TO REMOVE BATTERY PACK

■ Lock switch trigger on your drill by placing the

direction of rotation selector in center position.

See Figure 2.

■ Locate latches on end of battery pack and

depress to release battery pack from your drill.

See Figure 4.

■ Remove battery pack from your drill.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Craftsman 973.114240 User Manual Page 10

Comments to this Manuals

Related products and manuals for Power tools Craftsman 973.114240