Craftsman 351.217590 Operator's Manual download pdf (Page 3)

• Turn machine off if it jams. Blade jams when it digs too

deeply into workpiece. (Motor force keeps it stuck in

the work.)

• Always keep drive, cutterhead and blade guards in place

and in proper operating condition.

• Feed work into blade against direction of rotation.

CAUTION: Think safety! Safety is a combination of operator

common sense and alertness at all times when tool is

being used.

WARNING: Do not attempt to operate tool until it is

completely assembled according to the instructions.

Refer to Figure 1.

Check for shipping damage. If damage has occurred, a

claim must be filed with carrier. Check for completeness.

Immediately report missing parts to dealer.

The planer comes assembled as one unit. Additional parts

which need to be fastened to planer should be located and

accounted for before assembling.

A. Handle Assembly with Bolt and Plug

B. Dust Chute with Screw

C. Half Bag Dust Collection Set

Figure 1 - Unpacking Planer

WARNING: Do not attempt assembly if parts are missing.

Use this manual to order replacement parts.

INSTALL BATTERIES

* Loosen and remove four socket head pan screws and

then remove the display panel cover (see Figure 2).

* Insert four (4) C batteries (not included). Make sure to

install the batteries using the correct polarity (i.e., the "+"

symbol on the battery aligns with the "+" symbol on the

battery holder).

* Replace the cover and secure in position with the four

socket head pan screws.

Figure 2 - Remove Display Panel

Figure 3 - Install Batteries

INSTALL HANDLE

Refer to Figure 4.

° Handle with knob is installed on the top right of the planer.

° Insert handle with knob onto elevation screw top.

° Secure handle with socket head bolt using wrench provided.

° Insert plug into handle to cover bolt.

Figure 4 - Installing Handle

1 2 3 4 5 6 7 8 ... 31 32

No comments

Craftsman 351.217590 Operator's Manual Page 3