Craftsman 315.117260 User Manual download pdf (Page 6)

SPECIFICATIONS

Belt Size.......................................................................................................................................3 in. X 21 in. (76 mm X 533 mm)

Sanding Surface....................................................................................................................... 16.5 square in. (106.5 square cm)

Input.........................................................................................................................................120 Volts, 60 Hz, AC only, 8 Amps

No Load Speed.................................................................................................................................................. 1300 ft.(396 m)/min

Net Weight................................................................................................................................................................10.5 lbs (4.8 kg)

DOUBLE INSULATION

Double insulation is a concept in safety in electric power

tools, which eliminates the need for the usual three-wire

grounded power cord. All exposed metal parts are

isolated from the internal metal motor components with

protecting insulation. Double insulated tools do not need

to be grounded.

Important; Servicing of a tool with double insulation

requires extreme care and knowledge of the system and

should be performed only by a qualified service

technician. For service, we suggest you return the tool

to your nearest authorized service center for repair.

When servicing, use only identical Craftsman

replacement parts.

WARNING: The double insulated system is

intended to protect the user from shock resulting

from a break in the tool's internal wiring. Observe

ail normal safety precautions to avoid electrical

shock.

ELECTRICAL CONNECTION

The belt sender has a precision built electric motor. It

should be connected to a power supply that is 120

volts, 60 Hz, AC only (normal household current).

Do not operate this tool on direct current (DC). A

substantial voltage drop will cause a loss of power and

the motor will overheat. If your tool does not operate

when plugged into an outlet, double-check the power

supply.

EXTENSION CORDS

The use of any extension cord will cause some loss of

power. To keep the loss to a minimum and to prevent

tool overheating, use an extension cord that is heavy

enough to carry the current the tool will draw.

A wire gage size (A.W.Q.) of at least 14 is

recommended for an extension cord 50 feet or less in

length. When working outdoors, use an extension cord

that is suitable for outdoor use. This type of cord is

designated with "WA" on the cord's jacket.

A CAUTION: Keep extension cords clear of the

working area. While you are working with a power

tool, position the cord so that it will not get caught

on lumber, tools, or other obstructions.

A WARNING: Check extension cords before each

use. if damaged, replace them immediately. Never

use a damaged cord with this tool. Touching the

damaged area could cause serious injury due to

electrical shock.

Extension cords suitable for use with your tool are

available at your nearest Sears retail store.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Comments to this Manuals

No comments

Craftsman 315.117260 User Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.117260