Craftsman 28180 - Fixed-Base Router/Table Combo Manual download pdf (Page 11)

Your router table has a precision-built electric switch box and it should be con-

nected to only a 120-volt, 60-HZ AC power supply (normal household current),

DO NOT operate on direct current (DC). The large voltage drop would cause a

loss of power and the motor would overheat. If the router table does not oper-

ate when plugged into correct 120-volt, 60-HZ AC ONLY outlet, check the power

supply° The router table comes with an 8-ft. power cord (no adapter needed).

This Router Table has the following features:

50utfeed fence 10, Dust Collection and Guard pter

11 Above-the-table 3 Extended fence

1 Router table

2 Integrated safety

switch

8 Fastening

Back of the Switch

1, Oversized table (14-1/8" x 23-5/8") for a large, smooth, durable, work sur-

face and improved sound absorption. Table height clearance is 11-1/4 in. to

accommodate most fixed and plunge-based routers

2_ Integrated safety switch with two outlets, Single-socket capacity is t 5 Amps,

total capacity is 20 Amps.

3. Extended fence provides maximum work piece support; the fence can be

moved forward and backward 3-3/4 inch.

4. Infeed and outfeed fence can each be extended 2 in_

5. Outfeed fence can be adjusted as much as 9/16-in. forward of the infeed

fence for joining operations.

& Vacuum adapter fits a 2-1/2 inch shop vacuum hose,,

7. Miter-gauge adjusts from 0° to 60 ° in both directions for increased stability in

many difficult feed situations.

8. Fastening holes (11/32-inch dia.) allow the Router Table to be fixed to a

stable work surface.

28180 Manual Revised 0743228 Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Craftsman 28180 - Fixed-Base Router/Table Combo Manual Page 11