Craftsman 919 Owner's Manual download pdf (Page 19)

19- ENG

A13573

6. Remove the outlet pressure

gauge, tank pressure gauge, and

quick connect (if equipped) from

the regulator.

7. Remove the regulator.

8. Apply pipe sealant tape to the

nipple.

9. Assemble the regulator and

orient as shown.

NOTE: Arrow indicates flow of air.

Make sure it is pointing in the

direction of air flow.

10. Reapply pipe sealant to outlet

pressure gauge, tank pressure

gauge, and quick connect.

11. Reassemble outlet pressure

gauge, tank pressure gauge, and

quick connect. Orient outlet

pressure gauge and tank

pressure gauge to read correctly.

Tighten quick connect with

wrench.

12. Rotate pressure switch assemble

into correct position.

13. Replace console cover and

regulator ring.

To Replace Regulator

1. Release all air pressure from air

tank. See "To Drain Tank" in the

"Maintenance" section.

2. Unplug air comrpessor.

3. Remove the regulator ring and

remove the console cover.

gauge and quick connect.

4. Using an adjustable wrench

loosen pressure relief tube nut at

air tank and pressure switch.

5. Using an adjustable wrench,

rotate the pressure switch

assembly as shown.

Regulator

Quick

Connect

Tank

Pressure

Gauge

Outlet

Pressure

Gauge

Regulator

Ring

Cover

Arrow

11. Replace the pressure release

tube. Tighten nuts.

12. Replace the outlet tube and

tighten nuts.

13. Replace shrouds and console.

14. Perform the Break-in Procedure.

See "Break-in Procedure" in the

"Operation" section.

Regulator

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments