Craftsman 315.115033 User Manual download pdf (Page 6)

PRODUCT SPECIFICATIONS

Size of Sanding Disc

Size of Poiishing Bonnet

Horsepower

6 inches Rating 120 voits, 60 Hz, AC only, 4.5 amps.

6 inches Spindle Size 1/2 inch 20 TPI

1/2 No Load Speed 1,400/min. & 1650 /min.

OPERATION

A WARNING: Always wear safety goggles or

safety glasses with side shields when operating

your sander/polisher. Failure to do so could

result in dust, shavings, loose particles or foreign

objects being thrown into your eyes, causing

possible serious injury.

KNOW YOUR SANDER/POLISHER

Your sander/polisher is suitable for sanding with

coarse, medium, and fine grit sanding discs. When

used with the polishing bonnet supplied, it can also be

used as a buffer or polisher.

Before attempting to use any tool, familiarize yourself

with all operating features and safety requirements.

A WARNING: The double insulated system is

““ intended to protect the user from shock resulting

from a break in the tool's internal wiring. Observe

all normal safety precautions related to avoiding

electrical shock.

TWO SPEED SWITCH

See Figure 1.

Your sander/polisher is equipped with a two speed

switch trigger located in the rear handle. To turn ON,

depress switch trigger, to turn OFF, release switch

trigger. For low speed sanding or polishing, depress

switch trigger halfway. For high speed sanding or

polishing depress switch trigger all the way. Be sure

switch trigger is in OFF position before connecting to

power supply source.

A WARNING: Do not allow familiarity with your

tool to make you careless. Remember that a

careless fraction of a second is sufficient to

inflict severe injury.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Craftsman 315.115033 User Manual Page 6