Instruction ManualCRRFTSMRNBRUSHCUTTER ATTACHMENTModel No.C944.511591ADANGER:Read and follow all Safety Rules and Operating Instructions before first
MAINTENANCEMAINTENANCE SCHEDULEA WARNING: Always stop unit and disconnect spark plug wire before performing maintenance.CARE AND MAINTENANCE TASKWHEN
Romove both washers and the blade from the blade shaft. Leave the dust cup on the gearbox, install new blade and retaining washer onto the threaded sh
TABLE OF CONTENTSWarranty Statement 2Identification of Symbols 2Safety Rules 2Assembly 5Operation 7Maintenance 10Service & Adjustments 10St
M M DANGER: Blade can thrust violently away from material it does not cut. Biade thrust can cause amputation of arms or legs. Keep people and anima
ken, or damaged in any other way before using the unit.• Maintain the unit according to recommended procedures. Keep the blade sharp. Never use flai
ASSEMBLYCARTON CONTENTSCheck carton contents against the following list.Model C944.511591• Brushcutter attachment• Handlebar• Handlebar mounting b
2. Position one of the bracket covers under the upper shaft and align the mounting bracket and the bracket cover screw holes. Insert two screws into
KNOW YOUR BRUSHCUTTER ATTACHMENTREAD THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations
CouplerUpper ShaftLOOSENOPERATING POSITIONTIGHTEN Knob2. Press and hold the locking/release button.Locking/Release ButtonCoupler Lower AttachmentUppe
WHEN BLADE THRUST OCCURS - Blade Thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it
Comments to this Manuals