ASSEMBLY MANUAL / OWNER’S MANUAL
10X4#2*8X4#2*84. Install Console on Console Mast Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cable
115. Install Seat Post on Frame NOTICE: Make sure the Adjustment Knob engages the Seat Post. Do not set the Seat Post position higher than the stop
127. Install Pedals Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orienta-tion is based from a
138. Install Water Bottle Holder Note: The hardware(*) is pre-installed on the Console Mast and not on Hardware Card.14X2*9. Connect AC Adapter10. F
14Leveling Your BikeLevelers are found on each side of the Rear Stabilizer. Turn the stabilizer foot to adjust. Make sure the bike is level andstable
15!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.Before using this equipment, obey
16FEATURESA Console J Power ConnectorB Handlebars K Water Bottle HolderC Adjustable Seat L MP3 InputD Adjustment Knob M USB PortE Pedals N Contact Hea
17Console FeaturesThe Console provides important information about your workout and lets you control the resistance levels while you exercise.TheCon
18FAN button- Controls 3-speed fanResistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workoutAchievement Indi
19Achievement DisplayThe Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past workouts. The Cons
2Important Safety Instructions - Assembly 3 Safety Warning Labels / Serial Number 4Specications 4Before Assembly 5Parts 6Hardware 7Tools 7Assemb
20Export Workout Results to USB DriveThis Nautilus® tness machine is equipped with a USB Port and can export your Workout Results to a USB Drive. Wit
2120-24FAT-BURNING TARGET HEART RATEHeart Rate BPM (beats per minute)Age25-2905010015020025030-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69 70+1961911
22OPERATIONSWhat to WearWearrubber-soledathleticshoes.Youwillneedtheappropriateclothesforexercisethatallowyoutomovefreely.How Often S
233. Time:PushtheIncrease/Decreasebuttonstoadjustthecurrentlyactivevalue(ashing).PushtheLeft/Rightbuttonsto change which segment is
24Edit User Profile1. From the Power-Up Mode screen, push the User button toselectoneoftheUserProles. 2. Push the OK button to select it.3
256. Push OK to make your selection.7. The Console will go to the Power-Up Mode screen.Changing Resistance LevelsPush the Resistance Level Increase(
26Workout Profile and Goal ProgramTheConsoleletsyouselecttheProleProgramandtypeofGoalforyourworkout(Distance,TimeorCalories),ands
272. Push the Increase() or Decrease() buttons to selectthepercentageofmaximumheartrate:50–60%,60–70%,70–80%,80–90%.Consultaphysicia
28Push the Left() or Right() buttons to move through the result channels manually.During the Cool Down period, the Resistance Level will adjust to a
295. Push the Increase() buttontomovetothe“SAVETOUSB-OK?”prompt.PushOKandthe“AREYOUSURE?-NO” prompt will display. Push the Incre
3IMPORTANT SAFETY INSTRUCTIONS — ASSEMBLY!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious in
30The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change the machine type, control
31Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the necessary tasks.Eq
32ABCCDEFGHIJJAKLJMNOPQRSTUVWXDAABBCCZYDDEEMaintenance PartsA Console L HR Cable W FlywheelB Console Mast M CHR Sensors X Brake AssemblyC Pedals N Sea
33TROUBLESHOOTINGCondition/Problem Things to Check SolutionNo display/partial display/unit will not turn onCheck electrical (wall) outletMake sure uni
34Condition/Problem Things to Check SolutionReset Machine Unplug unit from electrical outlet for 3 minutes. Reconnect to outlet. Check magnet position
35WARRANTYWho Is CoveredThis warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).What Is Cov
Nautilus® Bowex® Schwinn® Universal®8004082.100114.DEN
4SAFETY WARNING LABELS AND SERIAL NUMBERFCC Compliance!Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompli
5SPECIFICATIONS41.8” (104cm)21.6” (55cm)57.6” (146cm)Before Assembly Select the area where you are going to set up and operate your machine. For safe
6PARTSItem Qty Description Item Qty Description1 1 Main Frame 9 1 Seat Post2 1 Front Stabilizer 10 1 Adjustment Knob3 1 Rear Stabilizer 11 1 Seat4 1
7HARDWARE / TOOLSToolsIncluded Not Included6 mm(recommended)Item Qty DescriptionA 4 ButtonHeadHexScrewM8x16B 5 Lock Washer M8C 4 Flat Was
8ASSEMBLY1. Attach Stabilizers to Main Frame Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport w
93. Install Handlebars on Console Mast NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (5a), adjust the Handlebar to the desi
Comments to this Manuals