Craftsman 71-24586 Owner's Manual download pdf (Page 8)

ASSEMBLY

FIGURE 1

5/8"x 2"

HEX BOLT

5/8" NYLOCK NUT

5/8" JAM NUT

5/8"x 1-3/4"

HEX BOLT

LIFTING LINK

STEP 1: (SEE FIGURE 1)

• Assemble the two 5/8" jam nuts halfway onto the two

5/8" x 2" hex bolts. Screw the bolts into the nuts that are

welded to the Sleeve Hitch Lift Assembly. Tighten the

jam nuts against the welded nuts.

• Assemble the Lifting Link to the Sleeve Hitch Lift

Assembly using a 5/8" x 1-3/4" hex bolt and a 5/8"

nylock nut. Use the bottom hole in the Lifting Link (gives

the lowest implement depth setting). Tighten the nut

only until snug. Do not squeeze welded arms together.

STEP 2: (SEE FIGURE 2)

• Attach the Sleeve Hitch Lift Assembly to the Sleeve

Hitch Frame Assembly using three 5/8" x 1-3/4" clevis

pins and 3/32" hair cotter pins.

• Install the Hitch Pin in the sleeve hitch and secure it

with the 5/32" hair cotter pin.

FIGURE 2

(3) 3/32" HAIR

COTTER PINS

5/32" HAIR

COTTER PIN

HITCH PIN

(3) CLEVIS PINS

LIFT ASSEMBLY

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Craftsman 71-24586 Owner's Manual Page 8