Assembly Step 4
Install the Chain/Cable &
Attach the Sprocket Cover
I)i_per_ng Carton
entangle¢l In moving opener sprockeL Attach
sprocket cover eecurely. Never operate oPener
• Detach the cable loop from the carton and fasten it
to the trolley with a master link from the hardware
bag. See master link procedure, Figure 1.
• W'dhthe trolley against the screwdriver, dispense
the cable around the pulley.
• Proceed back around the opener sprocket,
Figure 2. Be sure sprocket teeth engage the
chain. Continue forward to the trolley
threaded shaft, Figure 3. MasterLink
• Use the second master link to connect
the chain to the fiat end of the shaft.
Master
Check to make sure the chain Is
not twisted.
• Remove the screwdriver.
Figure 2 op.,_
sprocket
Figure 3
Ftet End
of Trolley
Chain
,Rn Notch
Inst_l Clmln andCa_e
In1111sDir_tion
SWod_
Cover
BackTab Slot
Figure I
Master Unk Procedure:
Pushpinsof masterlinkbar
throughcableloopand holein
frontend of trolley.Pushcap
overpinsand intonotches.
Slidedip-on spdngovercap
and intonotchesuntilboth
pinsam securelylocked.
To attach the sprocket cover:
• Insert the back tab in the opener slot. Squeeze the
cover slightly and insert the front tab in the slot on
the mounting plate.
10
Comments to this Manuals