Craftsman 917.881064 User Manual download pdf (Page 6)

ASSEMBLY / PRE-OPERATION

Read these Instructions and this manual In Its entirety

before you attempt to assemble or operate your new

snow thrower. Reading the entire manual will familiar

ize you with the unit, which will assist you In assembly,

operation and maintenance of the product.

Your new snow thrower has been assembled at the factory

with the exception of those parts left unassembled for ship

ping purposes. All parts such as nuts, washers, bolts, etc,,

necessary to complete the assembly have been placed in

the parts bag. To ensure safe and proper operation of your

snow thrower, all parts and hardware you assemble must

be tightened securely. Use the correct tools as necessary

to ensure proper tightness,

REMOVE SNOW THROWER FROM CARTON

1, Remove all accessible loose parts and parts boxes

from carton,

2, Cut down all four corners of carton and lay panels flat,

3, Remove the two (2) screws securing the auger housing

to the pallet,

4, Remove all packing materials except plastictie holding

speed control rod to lower handle,

5, Remove the two (2) plastic ties securing upper handle

to pallet,

6, Remove snow thrower from carton and check carton

thoroughly for additional loose parts,

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 10)

A toolbox is provided on your snow thrower. The toolbox is

located on top of the belt cover. Store the extra shear bolts,

nuts and multi-wrench provided in parts bag in the toolbox,

NOTE: The multi-wrench may be used for assembly of the

chute rotator head to snow thrower and making adjustments

to the skid plates,

UNFOLD UPPER HANDLE

1, Raise upper handle to the operating position and

tighten handle knobs securely. Additional carriage

bolts, washers and handle knobs are in bag of parts.

Use to secure upper handle to lower handle. Install

in lower holes in handles,

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1, Remove plastic tie securing rod to lower handle,

2, Insert rod into speed control bracket and secure with

retainer spring.

1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Comments to this Manuals

No comments

Craftsman 917.881064 User Manual Page 6

Comments to this Manuals

Related products and manuals for Cars Craftsman 917.881064