Craftsman 919.168700 Owner's Manual download pdf (Page 18)

To Replace Regulator

1. Release all air pressure from air

tank. See "To Drain Tank" in the

Maintenance section.

2. Set the On/Auto/Off lever to

"OFF" and unplug unit,

3. Remove the outlet pressure

gauge and quick connect (if

equipped) from the regulator.

6. Assemble the regulator and

orient as shown.

NOTE: Arrow indicates flow or air.

Make sure it is pointing in the

direction of air flow.

4. Remove the regulator.

5. Apply pipe sealant tape to the

nipple. Reapply pipe sealant to outlet

pressure gauge and quick

connect.

Reassemble outlet pressure

gauge and quick connect. Orient

outlet pressure gauge to read

correctly. Tighten quick connect

with wrench.

A05563 18-ENG

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Comments to this Manuals

No comments